TheHaflinger.com

G,,day , Gary .
i am pleased it is good .

cheers
kerry

Gary , there is a bearing puller that will remove that bearing without disasembly
it uses a ball with flats on the side , push in between inner and outer race then turn 90 degree to engage both races

kerry

i think they are .
but i have only seen them mounted on the front .
so i do not know for sure .

kerry

i have some of the cyclonic inlets . as were fitted to the front on Australian Haflingers

kerry

G,,day . the strap needs a bit of give , to stop shock loading . i have made countless number using seat belt webbing . 50 mm folded in half , and a big overlap in the centre . or 25 mm and an extra time around each mounting tab . but you will need a good industrial sewing machine . also the stitchi...

G,,day , an industrial stethoscope is very usefull for finding bearing noise .
or a through tang screwdriver works well .

kerry

Gary , i have a full set . of 31 /14 gears

send me a phone number

kerry

tell me how many teeth , both gears ,
i will look through mine

kerry

G,,day .
tell me how many teeth on each gear .
i can look through mine .
kerry

in hot weather , with a hot motor , the fuel evaporates from the carby quicker than you think it could .
with electric pump turn the key , wait for pump to stop .

also good if you run out of fuel .
vroom vroom .

kerry

Eberspacher is opulent . i have one

kerry

for those wondering , yes they fit , but you do need to space / lift your coils a bit .
also you do lose a bit of steering lock .
but in super soft stuff , awesome

kerry

there are 5 block pattern and 2 tractor ,

kerry

there are a lot of other parts .

also 24 x 12 x 12 2 ply floatation tyres on rims .

kerry

more photos
this is some of it , the cardboard boxes contain a lot of parts
kerry

100_1885_opt.jpg thanks for the help with the photo , i will put up more later left to right oil pump mushroom valve face cutter tool for fitting gearbox input shaft seal clutch plate alignment steering , centre relay bush tool main seal fitting ??? pt no 501.1.5522 litchfield E1182 tap type puller...

G,,day . would someone remind me how to post photos .

they are resized already

cheers
kerry

haffy parts resize


sorry its just not working

kerry

G,,day i have forced myself to find time
i am not good at doing this , so please forgive me ,
the tool photos , and photos of parts shed .
lots of small new parts are in the parts boxes .
plus other stuff .

ok it did not work