Garry , I know what you mean ,you will have a few more days like this by the time you have finished.
regards Dave
Search found 434 matches
- Sun Feb 10, 2013 7:36 am
- Forum: Gearbox and Driveline
- Topic: Disconnect Clutch Cable From Steering Box
- Replies: 6
- Views: 1162
- Sun Feb 10, 2013 5:29 am
- Forum: Gearbox and Driveline
- Topic: Disconnect Clutch Cable From Steering Box
- Replies: 6
- Views: 1162
Re: Disconnect Clutch Cable From Steering Box
Hi Garry, There are 2 plates , 1 each side of the bottom of the steering column ,if memory serves me right , I think there are 3 securing bolts on each plate, remove the plates , you can now access the nut at the end of the clutch cable , the cable can now be unhooked at the engine end and then slid...
- Sat Feb 09, 2013 11:21 pm
- Forum: Random Pictures
- Topic: 3 Haflingers found
- Replies: 9
- Views: 5618
3 Haflingers found
I visited the owner of the Haflinger mentioned in the Rebuild post , this is the one up on chain blocks ,apparently his son ripped the swinging arm off a few years ago and they have not got round to repairing it yet. While I was there I was told about another Haflinger about 5 Kms away so I took the...
- Sat Feb 09, 2013 4:36 am
- Forum: Body and Paint
- Topic: rebuild
- Replies: 6
- Views: 1451
Re: rebuild
Hi Sam, sorry but I dont know how the process is done,they were on the Haf when I purchased it.
regards Dave
regards Dave
- Sat Feb 09, 2013 4:32 am
- Forum: Body and Paint
- Topic: Rust Repairs - Poor design
- Replies: 22
- Views: 3708
Re: Rust Repairs - Poor design
Hi Garry. the metal collar has 3 little buttons ,1 on each side,press these in then the collar will prise up.
regards dave
regards dave
- Fri Feb 08, 2013 7:47 am
- Forum: Body and Paint
- Topic: rebuild
- Replies: 6
- Views: 1451
Re: rebuild
Hi Sam & Rick, thank you for the compliments, Sam the tyres are semprit which have been retreaded and they are on original rims, Rick yes it has been a hard slog but an enjoyable one ,I have had the Haf for about 4 years now , I have to fill and bleed the brakes and adjust the hand brake plus a ...
- Thu Feb 07, 2013 10:22 am
- Forum: Body and Paint
- Topic: Canvas Top
- Replies: 27
- Views: 8822
Re: Canvas Top
Hi, If any one in Australia who has access to a LWB type canvas top with 4 Doors as a template, please let me know as I will need one at some stage of my rebuild .I also need measurements & sizes for the canvas bows as well. Rick is the offer still on to lend me the door frames when I require th...
- Thu Feb 07, 2013 10:07 am
- Forum: Body and Paint
- Topic: Tail Board
- Replies: 10
- Views: 5909
Tail Board
Hi , I have just had these Tail boards made , I picked them up today ,I am waiting for the short side boards to be completed then I will add a photo of them as well.
Dave
Dave
- Thu Feb 07, 2013 10:04 am
- Forum: Body and Paint
- Topic: Body & Chassis
- Replies: 1
- Views: 1093
Body & Chassis
Body meets Chassis in my new shed.
Dave.
Dave.
- Thu Feb 07, 2013 9:59 am
- Forum: Body and Paint
- Topic: rebuild
- Replies: 6
- Views: 1451
rebuild
Moving the chassis from the front garage to my new shed.
Dave.
Dave.
- Thu Feb 07, 2013 9:56 am
- Forum: Body and Paint
- Topic: New seat pads
- Replies: 1
- Views: 1011
New seat pads
Hi , Here are the new seat pads I had made about 2 months ago.
Dave.
Dave.
- Mon Jan 28, 2013 9:24 pm
- Forum: Electrical
- Topic: wiring harness
- Replies: 3
- Views: 1306
Re: wiring harness
I have spoken to Dale at Haflinger Tecknik and he has checked one of his Haflingers and the wire connects to the small rectangular relay , terminal marked 30/51. between the starter solenoid and fuel filter .
Dave.
Dave.
- Sun Jan 20, 2013 3:50 am
- Forum: Electrical
- Topic: wiring harness
- Replies: 3
- Views: 1306
wiring harness
Hi, as stated in my first post I am rebuilding a Lwb haffy , I have made a new wiring harness as the old one was in a bad state of repair, I have taken lots of photos of the rebuild ,including the engine bay wiring harness . the vehicle has a suppression type harness and parts as shown on page 9.10/...
- Sun Jan 20, 2013 3:20 am
- Forum: Show and Tell
- Topic: First post
- Replies: 1
- Views: 971
First post
Hi , my name is Dave Ogden and I live in Cairns Australia, I am 3/4 way through rebuilding a 1968 LWB Haflinger,