Page 1 of 1

Tools

Posted: Sun Jul 02, 2017 7:51 am
by ogdenenterprise
I want to make up a tool roll similar to a original one that would have been supplied with a new Haflinger, has anyone any photos of what was in the kit or maybe a list of parts and sizes of the roll and tools. If any one has any of the original tools they want to sell please PM. me .

Dave

Re: Tools

Posted: Tue Jul 04, 2017 11:14 pm
by Czechsix
There were different varieties of tool rolls, bags, and tools. Then there are the differences between the different years, types, nationalities, etc.

I guess it comes down to how much historical accuracy you want?

For the swiss truck I have, all the kit was in a bag with a flap and a tie.

Re: Tools

Posted: Wed Jul 05, 2017 8:22 am
by ogdenenterprise
Thanks for the reply, I have rebuilt my Haflinger to as near original as possible, its a 68 Lwb, it would be appreciated if you could post a photo of your tool kit. it would give me some idea what was available and at least some where to start looking for different tools.

Dave

Re: Tools

Posted: Wed Jul 05, 2017 10:54 am
by heinkeljb
So have a look at this:-

http://www.goatwerks.com/images/hafiepi ... Manual.pdf

Right at the end of the manual 30 95/0 you will see a page listing all the original tools that would have been sold with a Haflinger (I doubt that would change much between years /models. Far more likely to change due to region due to requirements for local content in Knock Down Paks.

John

Re: Tools

Posted: Wed Jul 05, 2017 11:15 am
by AustHaflinger
Dave - would your LWB have been assembled in Melbourne? Other than jack and wheel brace was a tool kit standard or an option. I guess it would be on your build sheet.

If it was assembled in Melbourne I guess that Tony could tell you what it should or should not have.

Cheers

Garry

Re: Tools

Posted: Wed Jul 05, 2017 9:17 pm
by ogdenenterprise
Hi John, Thank you for reminding me about the parts book , I never thought to look :oops:

Hi Garry, I think it was assembled in Melbourne, after I wrote the message yesterday I rang Tony but there was no answer, I will try again today.

Dave

Re: Tools

Posted: Thu Jul 06, 2017 11:48 pm
by Czechsix
OK, dug up a few pics.

I stole these fair and square from vehicle for sale listings. :D

I believe this is a Swiss military kit. At the least it's the same as mine, but I do have a different spark plug wrench.
Image

Civilian kit?
Image

Different type of bag - this one is blue. No idea as to source.
Image

Re: Tools

Posted: Fri Jul 07, 2017 6:19 am
by ogdenenterprise
perfect , thank you very much for posting the photos.

Dave

Re: Tools

Posted: Fri Jul 07, 2017 3:46 pm
by kerry460
Dave .
send me your phone number .

kerry

Re: Tools

Posted: Fri Jul 07, 2017 11:00 pm
by ogdenenterprise
Thanks Kerry , message sent to your mobile.

Dave.

Re: Tools

Posted: Sun Jul 09, 2017 8:48 am
by tiziano
Original photo

Image

Re: Tools

Posted: Mon Jul 10, 2017 7:04 am
by ogdenenterprise
Thanks Tiziano,
Another question regarding the open end spanners, are they made by Stubia / Austria?, plus any info who manufactured the other tools and also the scissor and hydraulic jack.

Dave

Re: Tools

Posted: Mon Jul 10, 2017 12:51 pm
by tiziano
Hello Dave

Image

Image

size 8/10, 9/11, 12/14, 13/15, 17/22, 19/24

Hydraulic jack was adopted in about 1972

Image

Image

type A 2-170

Unfortunately for the scissor jack I do not remember the factory, I check and let you know.

Tiziano