I require a new rubber seal( part no.41) that fits on the top of the air deflector plate (no 40) and seals to the blower cowl (no 1)on page 1 25/0 of the parts book as mine is getting worn. has any one got a new one that they wish to sell or advise where I could get one.
Dave
rubber seal
-
ogdenenterprise
- Posts: 432
- Joined: Sun Jan 06, 2013 7:40 am
- Location: Cairns , Australia
Re: rubber seal
Dave,
I would assume one of the European suppliers would have such a thing. But obviously it will cost a small amount but postage and handling will add to that....
Possibly, Dale at Haflinger Technik has it.
Can't you make a replacement out of felt or several layers of gasket paper? I would not have thought it has to deal with oil, only heat and stop air blowing past it.
John
I would assume one of the European suppliers would have such a thing. But obviously it will cost a small amount but postage and handling will add to that....
Possibly, Dale at Haflinger Technik has it.
Can't you make a replacement out of felt or several layers of gasket paper? I would not have thought it has to deal with oil, only heat and stop air blowing past it.
John
Haflinger 703AP LWB 1973 - (Once owned by Lady Sutherland & Sons.) Now called "Lurch" !
Have you hit the "DONATE" button at the bottom of the page after reading this post? Many thanks if you have!!
Have you hit the "DONATE" button at the bottom of the page after reading this post? Many thanks if you have!!