Hello,
Quick question, 1971 NA 700AP over here and I am curious what the stock wheel bolts are? 10mm x 1.5 pitch?
Thank you!
Haflinger Stock Lug Threads?
-
Brandon314159
- Posts: 6
- Joined: Sat Jan 05, 2013 10:58 pm
- Location: Portland, OR
- Contact:
Haflinger Stock Lug Threads?
-Brandon
1971 NA 700AP "TANGO"
1965 404.1 Funkwagen "SalMog"
1971 NA 700AP "TANGO"
1965 404.1 Funkwagen "SalMog"
Re: Haflinger Stock Lug Threads?
Brandon,
I just chased the threads of a wheel nut with an M10-1.50 and it seemed to go with minimal resistance and not obvious metal shavings. The real test will come whn I thn run that nut onto a wheel stud. the manual list the nut simply as an M10 but there is a hand written disigmnation for an M12-1.50 for the APK trucks. Our 703 APK ploycab has M10 nuts.
Hopes this helps.
Take care.
Jim Molloy
Waldersee Farm
http://www.northwestmogfest.com
I just chased the threads of a wheel nut with an M10-1.50 and it seemed to go with minimal resistance and not obvious metal shavings. The real test will come whn I thn run that nut onto a wheel stud. the manual list the nut simply as an M10 but there is a hand written disigmnation for an M12-1.50 for the APK trucks. Our 703 APK ploycab has M10 nuts.
Hopes this helps.
Take care.
Jim Molloy
Waldersee Farm
http://www.northwestmogfest.com
-
Brandon314159
- Posts: 6
- Joined: Sat Jan 05, 2013 10:58 pm
- Location: Portland, OR
- Contact:
Re: Haflinger Stock Lug Threads?
Thank you!
The M10 x 1.25 commonly found (even in ball-seat) wouldn't thread on.
The M10 x 1.25 commonly found (even in ball-seat) wouldn't thread on.
-Brandon
1971 NA 700AP "TANGO"
1965 404.1 Funkwagen "SalMog"
1971 NA 700AP "TANGO"
1965 404.1 Funkwagen "SalMog"
-
Tennmogger
- Posts: 56
- Joined: Sun Apr 28, 2013 2:02 am
Re: Haflinger Stock Lug Threads?
I can confirm 10mm x 1.5 as originally found on my NA model, 1968.. I replaced them with 12 x 1.5.
Bob
Bob
1952 Willys M-38, Unimogs from 1957, 1965, 1970, 1975, 1978, 1988, and a 1968 Haflinger NA bugeye!