TheHaflinger.com

just looked this up for some one .

wheel cylinder rubbers , non genuine .

PBR
front kit , K 719 S
rear kit , K413 S

front cup , P 4420
rear cup , P4422

boots , front and rear . P 4600


these are Aussie PBR part numbers , and I cant remember what vehicles other than Haffy that they fit .

cheers,
kerry

Hi Doug,

It's nice to have yet another set of part numbers which can be used for cross reference purposes at the very least if you can't get those bit directly.

Depending on which wheel cylinders you actually have fitted to the drums on your Haflinger you might need to buy the same for all four wheel cylinders.

I believe there is a VW wheel cylinder which it the same size and can be used as a replacement so you might find that when you buy the above they do not fit, so it would be a good idea to find out exactly what wheel cylinders you already have before buying seal kits.

John

Kerry

I have looked for these kits and they are around AU$40 each is this for a single cylinder or a pair? Do they contain all of the internal seals too?

Also do you have a reference for a seal kit and boot for the master cylinder?

Thanks in advance.

Sam

G,,day , i do not know from memory if it is one cylinder or two .

i have gone through some old paperwork

i have a K7104X listed as to do with the master cylinder
what it contains , i cant remember

kerry

Hi Kerry

Got those kits. $130 for all cylinders and master cylinder.

Bloody Marvellous really useful info.

Thanks

Sam

glad to be of help

kerry