brake information

Post Reply
kerry460
Posts: 211
Joined: Wed Oct 22, 2014 3:19 am
Location: Launceston Tasmania AUS,

brake information

Post by kerry460 »

just looked this up for some one .

wheel cylinder rubbers , non genuine .

PBR
front kit , K 719 S
rear kit , K413 S

front cup , P 4420
rear cup , P4422

boots , front and rear . P 4600


these are Aussie PBR part numbers , and I cant remember what vehicles other than Haffy that they fit .

cheers,
kerry
ex Tasmanian Haflinger agent .
1984 G Wagen 300GD auto
User avatar
heinkeljb
Posts: 2753
Joined: Sun Dec 30, 2012 12:49 pm
Location: Lewes, East Sussex - UK

Re: brake information

Post by heinkeljb »

Hi Doug,

It's nice to have yet another set of part numbers which can be used for cross reference purposes at the very least if you can't get those bit directly.

Depending on which wheel cylinders you actually have fitted to the drums on your Haflinger you might need to buy the same for all four wheel cylinders.

I believe there is a VW wheel cylinder which it the same size and can be used as a replacement so you might find that when you buy the above they do not fit, so it would be a good idea to find out exactly what wheel cylinders you already have before buying seal kits.

John
Haflinger 703AP LWB 1973 - (Once owned by Lady Sutherland & Sons.) Now called "Lurch" !

Have you hit the "DONATE" button at the bottom of the page after reading this post? Many thanks if you have!!
SAM
Posts: 44
Joined: Sun Jan 27, 2013 11:57 am
Location: Brisbane, Australia

Re: brake information

Post by SAM »

Kerry

I have looked for these kits and they are around AU$40 each is this for a single cylinder or a pair? Do they contain all of the internal seals too?

Also do you have a reference for a seal kit and boot for the master cylinder?

Thanks in advance.

Sam
kerry460
Posts: 211
Joined: Wed Oct 22, 2014 3:19 am
Location: Launceston Tasmania AUS,

Re: brake information

Post by kerry460 »

G,,day , i do not know from memory if it is one cylinder or two .

i have gone through some old paperwork

i have a K7104X listed as to do with the master cylinder
what it contains , i cant remember

kerry
ex Tasmanian Haflinger agent .
1984 G Wagen 300GD auto
SAM
Posts: 44
Joined: Sun Jan 27, 2013 11:57 am
Location: Brisbane, Australia

Re: brake information

Post by SAM »

Hi Kerry

Got those kits. $130 for all cylinders and master cylinder.

Bloody Marvellous really useful info.

Thanks

Sam
kerry460
Posts: 211
Joined: Wed Oct 22, 2014 3:19 am
Location: Launceston Tasmania AUS,

Re: brake information

Post by kerry460 »

glad to be of help

kerry
ex Tasmanian Haflinger agent .
1984 G Wagen 300GD auto
Post Reply