Brake fluid resovoir
Brake fluid resovoir
Hi all, just trying to work out connection between resovoir to brake line. Have new resovoir with material type outlet. Brake line is loose fit in, what is the best way of making this seal???
Re: Brake fluid resovoir
Original method is just a short length of braided rubber pipe joining the exit pipe from the reservoir to the metal brake pipe. Just need to get the correct I/D hose and it should seal.
That's supposing you have the correct diameter metal brake pipe from the reservoir to the master cylinder. THen it just is a push fit into the rubber bung on the master cylinder.
John
That's supposing you have the correct diameter metal brake pipe from the reservoir to the master cylinder. THen it just is a push fit into the rubber bung on the master cylinder.
John
Haflinger 703AP LWB 1973 - (Once owned by Lady Sutherland & Sons.) Now called "Lurch" !
Have you hit the "DONATE" button at the bottom of the page after reading this post? Many thanks if you have!!
Have you hit the "DONATE" button at the bottom of the page after reading this post? Many thanks if you have!!