special tools
Posted: Sun Feb 21, 2016 12:04 am
Finally getting round to rebuilding the engine after stripping it because of oil leaks . I have got as far a tightening the fly wheel., has anyone got a good photo of the fly wheel holder so I can make some thing to hold it or a suggestion as to how to hold the fly wheel when I torque it up. When I stripped the engine I put a ratchet strap round the casing and secured the casing to the bench to hold the engine . I have torqued the double pulley up , but with the torque setting being a lot higher on the fly wheel, it means I can,t put a spanner on it to hold that end to stop it spinning.
Dave
Dave