Page 1 of 1

Boottom engine panel ?

Posted: Tue Nov 11, 2014 12:59 am
by Vampyr
Hi, Can anyone post a photo of the panel beneath the engine, I can only find vague glimpse of what it looks like. thanks Danny

Re: Boottom engine panel ?

Posted: Tue Nov 11, 2014 5:38 am
by AustHaflinger
Sorry Danny - I do not have any pics of the three panels under my engine - there is one on either side and one at the rear. My car has its bash plate still in place so I would need to remove it to get picks.

However looking through my catalogue of pics I have this of a haffie in a museum - not my pic and not sure who took it.

Not clear but does show the three panels - note the one one the left is not the same as mine - mine goes all the way across - the panels are screwed on in some spots but are mainly held in place by the rubbers (not clear but I believe you can see them in the parts manual.

Image

Cheers

Garry

Re: Boottom engine panel ?

Posted: Tue Nov 11, 2014 7:26 am
by heinkeljb
I'll see if i can find the rear most panel, as I know i have a spare one of those. As for the other two. i'll look but I am not sure. The only real problem is it dark when I get home from work in the evening now and i have to go and look in a cold, dark shed at the bottom of the garden....

John

Re: Boottom engine panel ?

Posted: Tue Nov 11, 2014 8:17 am
by Vampyr
Thanks Gary and John, have now gone through my haflinger CD and have realised that it is the rear most panel. I have all the other tin work. A photo would be much appreciated John. I think I saw one on ebay from Robert Prokschi. Will go back and have a look. Many thanks Danny

Re: Boottom engine panel ?

Posted: Tue Nov 11, 2014 10:27 am
by AustHaflinger
Here are some pics of the panel taken from the rear rather than underneath - might help

Image

Image

Image

Image

Image

Re: Boottom engine panel ?

Posted: Tue Nov 11, 2014 7:49 pm
by heinkeljb
Hi Danny,

This what you were thinking of:-

http://www.ebay.co.uk/itm/STEYR-PUCH-HA ... 23441dca79

John

Re: Boottom engine panel ?

Posted: Tue Nov 11, 2014 8:59 pm
by Vampyr
Yes that's the one John, Thanks for the photo's Gary, Seeing the rear mounts for the engine bash plate was also very helpful. I was wondering what those were as I am still sorting through a range of bits and pieces. Thanks for all the help Guys. Regards Danny