Gearbox issues (3rd gear popping out and no syncro in 2nd)

Post Reply
User avatar
safari-haf
Posts: 12
Joined: Mon May 26, 2014 9:03 pm
Location: Nairobi, Kenya

Gearbox issues (3rd gear popping out and no syncro in 2nd)

Post by safari-haf »

Goatwerks wrote:Popping out of gear is a symptom of worn out shaft bearings. The trans will have to come apart.
Start a thread in drivetrain/transmission section.
Follow my signature link to photobucket, look in Haflinger albums and you will see what it takes and what it looks like.
BTW, 4 speed transmissions are very similar inside, you just have a different bearing plate and no crawler.
Group has permissions to use any of my tech photo's as long as photo source is noted 8-)
Jim, my fear was that it was something like that. Is it even possible to recondition the gearbox without all the special tools, jig etc? I have a SWB in pieces (missing quite a few) that maybe one day i was going to tackle. Perhaps I should experiment with that gearbox to be on the safe side? I assume all the relevant parts up until the gear linkage are the same as the LWB. I will check out your photobucket.

Cheers,

Paul
'64 Haflinger 703AP LWB
'67 Haflinger 703AP LWB
'66 Haflinger 700AP SWB (in pieces)
Post Reply