As I wait for my front diff bash guard bobbins, I have been looking at the rest of the drive train. Noticed an oil leak from a bit of the gearbox which I didn't think would produce a leak, but obviously has. Anyone know what might be the cause and therefore provide a remedy?
It appears to be from the joint between the gearbox selection tower and the gearbox proper. Does this mean some bolt(s) / Nut(s) have come loose?
John
Oil leak on the gearbox
Oil leak on the gearbox
Haflinger 703AP LWB 1973 - (Once owned by Lady Sutherland & Sons.) Now called "Lurch" !
Have you hit the "DONATE" button at the bottom of the page after reading this post? Many thanks if you have!!
Have you hit the "DONATE" button at the bottom of the page after reading this post? Many thanks if you have!!
Re: Oil leak on the gearbox
The cover gasket is shot, re seal the cover (you can make the gasket).
Very common seepage point.
Very common seepage point.
Re: Oil leak on the gearbox
Thanks Jim,
How much do I have to take apart in order to get to the gasket? No issue with making a replacement gasket, just haven't taken that bit apart before.
John
How much do I have to take apart in order to get to the gasket? No issue with making a replacement gasket, just haven't taken that bit apart before.
John
Haflinger 703AP LWB 1973 - (Once owned by Lady Sutherland & Sons.) Now called "Lurch" !
Have you hit the "DONATE" button at the bottom of the page after reading this post? Many thanks if you have!!
Have you hit the "DONATE" button at the bottom of the page after reading this post? Many thanks if you have!!