TheHaflinger.com

Hi, My apologies if you have already seen these photos on the yahoo Haflinger -Alive site,but I thought they may be use full to those that have not seen them if you plan to do a gearbox rebuild. This is a simple jig I made to set the selectors on the main shafts, I used the small piece with the holes which is bolted to the jig as a template to mark the holes for the main jig.

Dave

Very nice. I had seen this on the Yahoo site, but as you say new people might only find this site.

I have to ask, why do we need to use a jig to set the gearbox up? I thought this vehicle was designed for use by the army - for whom most things have to be simple. Having to use a jig is not simple! Especially if you don't have the jig.

John

Hi John,
Just noticed your question.
The jig is used for setting the position of the gear selector forks.
If you have to do some transmission work, simply disassemble without disturbing the setting of the forks on their shaft and you will be able to reassemble everything without needing the jig.
Cheers,
Sandy