Page 1 of 1

webbing buckles

Posted: Fri Jul 31, 2015 11:46 pm
by ogdenenterprise
I have ordered some 35mm webbing for the 3 straps that go from the windscreen to the rear canvas frame, on a canvas hood to stop it sagging .The parts book drawing and description is not very clear 27-11/0 , I have the 3 items that secure the webbing to the windscreen (8, 8A, 12) , I need some info on the 3 buckles (6) that tighten the straps at the rear ,has any one any photos or info as to what type. I want to keep them as original as possible.

Dave

Re: webbing buckles

Posted: Tue Aug 04, 2015 7:49 pm
by pathfinder700ap
Dave,

I think that on full canvas cabs, usually only two straps were fitted. You may have also noted, that on the rear canvas bow, there are only two ears for those straps (might be different on yours, since I think that you had it reproduced).

On the front end at the windscreen, the strap is sewed onto the rubber strap eye (no. 8a in 27 11/0, which you have already mentioned). The buckles at the rear end consist of no. 6 and no. 7, with no. 7 being riveted onto the strap as end cap. I think the buckle and the end cap might be hard to find... :|

I will take you some pictures within the next days, when I'm back at my dad's place.


Cheers,
Constantin

Re: webbing buckles

Posted: Sat Aug 08, 2015 8:32 pm
by pathfinder700ap
Hello David,
here are the pictures. I was wrong on the end caps, it seems they are not riveted but only pressed onto the straps.
Cheers, Constantin

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Re: webbing buckles

Posted: Sun Aug 09, 2015 5:57 am
by ogdenenterprise
Hi Constantin, thank you for the photos they are just what I wanted. Have you any more detailed photos of other straps and hook positions etc on different parts of the canvas .

Dave

Re: webbing buckles

Posted: Sun Aug 09, 2015 7:22 am
by pathfinder700ap
Hi Dave,

not yet, but I can do another shooting the next time I'm there! :-)

Cheers, C.

Re: webbing buckles

Posted: Sun Aug 09, 2015 10:25 pm
by ogdenenterprise
Thanks Constantin, that would be appreciated.

Dave

Re: webbing buckles

Posted: Mon Aug 10, 2015 1:42 am
by AustHaflinger
Dave - did you get a new canvas for your Haffie - if so where from?

Garry

Re: webbing buckles

Posted: Mon Aug 10, 2015 2:53 am
by ogdenenterprise
Hi Garry, No I haven't got a canvas cover yet , I know black canvas was available from the factory, does anyone know of any other colours that were available?
I received the canvas webbing this morning which is the same colour as Constantins photos, as usual I am forward planning for when I am ready to have the canvas hood made.

Dave

Re: webbing buckles

Posted: Mon Aug 10, 2015 6:04 am
by pathfinder700ap
Hi,

the Haflinger in the photos above still has its original canvas hood, and the color on the inside shows quite well what it must have looked like when new. On the outside, it has faded a lot, being not olive any more but rather light grey.

I also know of Haflingers with two different shades of green canvas and, of course, the already mentioned black canvas.
Some special Haflingers, e.g. Austrian Army for UN purpose, had white hoods.

My dad has some original canvas parts, new and used, so I can take some pictures of these as well.

Cheers, C.

Re: webbing buckles

Posted: Mon Aug 10, 2015 11:37 am
by ogdenenterprise
On the subject of canvas hoods , can anybody advise what type of material is the best to use . I want to keep the hood as near to original looks as possible, but obviously something that is going to last .

Dave

Re: webbing buckles

Posted: Sat Sep 12, 2015 2:20 am
by ogdenenterprise
I received these parts on Thursday from Tony in Melbourne, he sent me all of his parts he had in stock for canvas hoods plus a few other bits, I'm not sure where all the leather straps fit?, also the 2 threaded angle parts which are second in from the bottom right of the photo

Dave

Re: webbing buckles

Posted: Sat Sep 19, 2015 2:28 am
by ogdenenterprise
I have just compared the width of the webbing straps I received from Tony to the webbing I purchased , the parts book says 35mm ,so I this is what I ordered. The parts I received from Tony is only 32mm (as per previous photo) , has anybody access to any straps to confirm which is the correct width. I will have to cut the straps to use the buckles as they are for a SWB and mine is a LWB , I want to fit the correct width to keep things original.

Dave

Re: webbing buckles

Posted: Sat Sep 19, 2015 7:36 am
by pathfinder700ap
David,

again sorry for the delay in this topic, but at least the measurement of the strap width I think I can do this weekend.
Regarding the angle parts with the thread in your picture, I also don't know what they are good for. Haven't seen these parts before.


Cheers,
Constantin

Re: webbing buckles

Posted: Sat Sep 19, 2015 6:53 pm
by Goatwerks
The long leather straps are for securing the front windscreen supports at the center of the roll bar when it is lowered.(rods fold to center)
As far as strap width, it varies slightly over the years and by manufacturer.
The thin metal strips in the top left of picture are for the weather strip between windscreen frame and body.

Re: webbing buckles

Posted: Sun Sep 20, 2015 1:02 pm
by Yakov
Having just been looking at photos of the Haflinger for sale on the Austrian ebay site, the black metal bit in your photo with the ball in the middle (center left in your photo) looks like its for the leather tab that shuts the side door window.

Re: webbing buckles

Posted: Tue Sep 29, 2015 8:43 pm
by pathfinder700ap
The straps in my pictures are also 32 mm wide.

Cheers,
C.

Re: webbing buckles

Posted: Tue Sep 29, 2015 9:00 pm
by ogdenenterprise
Thanks Jim & Constantin , I will try and order some 32mm webbing.

Dave

Re: webbing buckles

Posted: Sun Dec 27, 2015 6:42 am
by ogdenenterprise
Following on from the 35mm cotton webbing which I ordered , at the same time I also purchased some 20mm cotton webbing as per the parts book, which I presumed would be for straps to secure the canvas above the windscreen and all the straps on the canvas where they secure to the vertical hoops. I have checked several photos and the straps look as though they are leather or something similar not cotton webbing. Can anyone advise what the straps should be and what lengths they are.

Happy & prosperous new year to everyone
Dave

Re: webbing buckles

Posted: Sun Dec 27, 2015 7:19 am
by Julian B
All of the straps on my 1972 LWB (which we have had since 1973) has webbing straps everywhere. The only leather straps that I have seen are presumably restorations. When I had a new canvas made for my 1962 SWB I used leather for durability / ease, even though I knew it wan't right.