Page 1 of 1

Different Nomnaclure Plates for 700ap

Posted: Sun Apr 10, 2016 1:34 am
by Vampyr
Hi Guys, have a question I've been discussing with Gary in Canberra, Australia. I have my 2nd 700AP with a torn in half Nomnaclure Plate. Now this plate is very similar to my 1974 other than the vehicle weights are lighter. Haflinger Technik stocks both different plates, just curious as to what the difference is?

Re: Different Nomnaclure Plates for 700ap

Posted: Sun Apr 10, 2016 9:03 am
by heinkeljb
Post some pictures so we can see, Could well be because the vehicle came from a different country initially, or they changed the plates layout due to the year it was built.

John

Re: Different Nomnaclure Plates for 700ap

Posted: Sun Apr 10, 2016 9:12 am
by AustHaflinger
Do the Poly cab versions have a higher tare weight due to the weight of the cabin?

Garry

Re: Different Nomnaclure Plates for 700ap

Posted: Sun Apr 10, 2016 10:59 am
by Julian B
Did the weight change correspond to the change in tyre size, number of gears or carb type (& thus power)?

Re: Different Nomnaclure Plates for 700ap

Posted: Mon Apr 11, 2016 11:03 am
by Vampyr
These are the ones at haflinger technik you will see what I mean, ! is for the 703 and the other 2 for 700ap.
vin.jpg

Re: Different Nomnaclure Plates for 700ap

Posted: Mon Apr 11, 2016 8:17 pm
by Techmogogy
The 1st one (700AP 1200kg) is what was on both of my Pathfinders

Re: Different Nomnaclure Plates for 700ap

Posted: Tue Apr 12, 2016 8:21 am
by Vampyr
The difference is only 50 and 40 kgs. I am assuming that the lighter plates may be for earlier vehicles and the increase in weight may have been for later vehicles which had heavier springs and more options, pto's , tow bars, full cabs etc. just a thought. Danny

Re: Different Nomnaclure Plates for 700ap

Posted: Tue Jun 28, 2016 9:35 am
by Vampyr
Spoke to Haflinger technik, and ordered the earlier plate, All they could tell me was the later models had a higher tare weight.Danny