Seat Backs

Post Reply
User avatar
Slantback60
Posts: 11
Joined: Wed Jan 02, 2013 6:31 am
Location: Near Seattle, Washington, USA

Seat Backs

Post by Slantback60 »

Here are measurements and photos of the seat back, which is common to all 4 seats. (at least on mine) :)
Joel
Measurements
Measurements
005.JPG (119.99 KiB) Viewed 1226 times
Strap Attachment detail.
Strap Attachment detail.
001.JPG (105.25 KiB) Viewed 1226 times
4cm thick low density foam
4cm thick low density foam
002.JPG (98.78 KiB) Viewed 1226 times
Front view. 24cm X 44cm x 4cm
Front view. 24cm X 44cm x 4cm
003.JPG (102.05 KiB) Viewed 1226 times
Back View. 18cm X 36cm sewn in strap panel. Pockets are 5.5cm, 7cm and 5.5cm respectively. smaller pockets are bowed out for ease of strap installation. Middle strap stayed on the outside.
Back View. 18cm X 36cm sewn in strap panel. Pockets are 5.5cm, 7cm and 5.5cm respectively. smaller pockets are bowed out for ease of strap installation. Middle strap stayed on the outside.
004.JPG (96.99 KiB) Viewed 1226 times
1960 Austrian Military Haflinger
User avatar
heinkeljb
Posts: 2754
Joined: Sun Dec 30, 2012 12:49 pm
Location: Lewes, East Sussex - UK

Re: Seat Backs

Post by heinkeljb »

Are these ones you have made for yourself or are they ones you are having to repair? If you are making them - make some more, I am sure there are lots of people who would buy them. (probably me included)!

John
Haflinger 703AP LWB 1973 - (Once owned by Lady Sutherland & Sons.) Now called "Lurch" !

Have you hit the "DONATE" button at the bottom of the page after reading this post? Many thanks if you have!!
User avatar
Slantback60
Posts: 11
Joined: Wed Jan 02, 2013 6:31 am
Location: Near Seattle, Washington, USA

Re: Seat Backs

Post by Slantback60 »

These are the ones that were on her. The stitching was rotten and the foam was worn, so I re stuffed and restitched them.
1960 Austrian Military Haflinger
Post Reply