http://www.ebay.at/itm/Steyr-Puch-500-6 ... 2c85c6d06d
http://www.ebay.at/itm/Steyr-Puch-Hafli ... 2c85c6e650
Bernd
Pathfinder Nameplate and filter housing (tuning) on ebay
Pathfinder Nameplate and filter housing (tuning) on ebay
2x 700 AP Pathfinder 1972
703 AP with Huber Winch
Pinzgauer 716 MK
https://www.haflingerverdeckesahler.at/
703 AP with Huber Winch
Pinzgauer 716 MK
https://www.haflingerverdeckesahler.at/
Re: Pathfinder Nameplate and filter housing (tuning) on ebay
Does the welding/brazing on the oil pressure gauge look lumpy? Maybe it's just the way I am looking at it.
i.e is it original or a mod?
i.e is it original or a mod?
Best Regards
Stuart
Northampton
Stuart
Northampton
Re: Pathfinder Nameplate and filter housing (tuning) on ebay
It's a modified paper filter cartridge type oil filter as fitted to early engines. Later engines like mine and yours have the spin on filter type.
So originally it would have been just a smooth curved top to that oil filter cover. Some one has drilled two holes in it and either brazed or welded two collars on with threads to take the oil temperature and oil pressure sensors.
John
So originally it would have been just a smooth curved top to that oil filter cover. Some one has drilled two holes in it and either brazed or welded two collars on with threads to take the oil temperature and oil pressure sensors.
John
Haflinger 703AP LWB 1973 - (Once owned by Lady Sutherland & Sons.) Now called "Lurch" !
Have you hit the "DONATE" button at the bottom of the page after reading this post? Many thanks if you have!!
Have you hit the "DONATE" button at the bottom of the page after reading this post? Many thanks if you have!!
- AustHaflinger
- Posts: 2472
- Joined: Sun Jan 06, 2013 1:27 am
- Location: Canberra Australia
Re: Pathfinder Nameplate and filter housing (tuning) on ebay
That is one way of doing it but it can be done better without modification.
I have this 4 way connector in the oil pressure switch hole - I currently have oil pressure and oil pressure light and later on the spare spot I will put the oil temp connection.
Garry
I have this 4 way connector in the oil pressure switch hole - I currently have oil pressure and oil pressure light and later on the spare spot I will put the oil temp connection.
Garry
Haflinger 700AP (73)
Range Rover Sport TDV6 (07)
Landrover FC 101 (77)
Landrover Series 1 SWB Station Wagon (57)
Landrover Series 1 SWB (57)
Jaguar E-type Roadster V12 (71)
Jaguar XJ12C (76)
Range Rover Sport TDV6 (07)
Landrover FC 101 (77)
Landrover Series 1 SWB Station Wagon (57)
Landrover Series 1 SWB (57)
Jaguar E-type Roadster V12 (71)
Jaguar XJ12C (76)
Re: Pathfinder Nameplate and filter housing (tuning) on ebay
Another way to put Oil pressure and temperature sensors in is via a "sandwich" plate if you have a spin on filter - see my post about fitting those items.
John
John
Haflinger 703AP LWB 1973 - (Once owned by Lady Sutherland & Sons.) Now called "Lurch" !
Have you hit the "DONATE" button at the bottom of the page after reading this post? Many thanks if you have!!
Have you hit the "DONATE" button at the bottom of the page after reading this post? Many thanks if you have!!