Before restoration, the engine, although with difficulty, worked, but not now. The engine is now installed in the chassis and to check it, I wanted to start it but it costs Dynastarter turn. When I remove the spark plugs seems that if it turns more easily.
I have reviewed all these things: the distributor is ok and the sparks reach the spark plugs, plug wires are not reversed; I have made an adjustment of valves and no loss of compression for some open valve; I removed spark plugs and checked that gasoline arrives from the carb; I removed the Dynastarter and I cleaned the brushes. I have reviewed the wiring and battery and everything seems fine ... Does anyone know where is the problem??
Thanks in advance for your time and your answers.
Ángel.-
![Image](http://img802.imageshack.us/img802/4869/ap46.jpg)