He was right on the money, I pulled the top cover off the carb, yanked it off....and the floats are loaded. I've given Leo C. an email for new parts, but in the meantime Jim mentioned it might be possible to use some of the gas tank epoxy to fix the floats.
Anyone ever done this? If so, how'd it turn out?
I'll probably source another one just to be sure, but when I have the time I'll pull the float, drain it (I've already drained both sides - #60 drill works fine right in the solder plug), boil the heck out of them, and then try a new solder plug. I'm pretty decent with fast soldering. Thought I might also make a copper heat sink to wrap around while I solder the plug, just so I don't loosen the seam solder job. I'll just a large electric iron for the job, after cleaning the hell out of the surface and getting a good flux going on it.
But that's in the future, now I'm off to the LAPS for the epoxy...yay.
![Laughing :lol:](./images/smilies/icon_lol.gif)